In Min’s design concept, the hydrogen spray in the original container was removed, and the gap in the container was retained, but the opening was reduced. This design also caused the organism to move at high speed in the universe, although it still Antimatter will be forcibly squeezed out due to inertial pressure, but it will not be lost in large quantities at one time. It is a slow release process.

　　 But this is a deliberate design layout!

　　According to Min’s idea, it is to use this slow release to gradually increase the speed of the organisms in the universe. On the outside of the gap, Min adds three nozzles to spray hydrogen clusters for the annihilation of positive and negative substances.

　　 "Very thoughtful design, but there is a problem."

【what is the problem? 】

"The annihilation of positive and anti-matter requires that the positive and anti-matter come into contact with each other. Such a design cannot fully contact the hydrogen and anti-hydrogen groups. In order to prevent the anti-hydrogen groups from being wasted, it is necessary More hydrogen clusters are sprayed out, which increases the load invisibly."

　　 Huogu explained the shortcomings of Min’s design. Min’s design does not have an electric field in the area where the antimatter and the positive substance are in contact, so it is impossible to carry out sufficient annihilation of positive and negative matter as designed by the collectors.

　　 "Is it enough to join the electric field?"

　　 Some collectors suggested so, but it was quickly refuted, and it was Min who refuted it.

[This is not feasible, so we need a structure that tends to be closed, and a large part of the energy that will lead to the annihilation of positive and negative matter will be intercepted by the material structure that tends to be closed. It can only become the heat energy carried by the matter and cannot be used as The thrust is used, and I did not include the electric field design because of this consideration. 】

　　【Hogu, do you have any good ways? 】

Huogu thought for a while. It added a horn-like design structure at the end, and then a magnetic ring surrounding the "horn". The released anti-hydrogen and hydrogen groups would be squeezed under the action of the electric field. Fully react together, and the outward-facing horn design can as far as possible without blocking the release of gamma rays after the annihilation of positive and negative matter.

　　 "In this case, the basic framework of antimatter advancement will be completed. Next, we need to refine the details and adjust the current framework parameters appropriately according to the situation."

　　 Huogu announced that it had entered the next stage, Min agreed and proposed issues that need to be resolved first.

　　 [Then solve the problem of gamma radiation first. 】

"Yes, this problem is the key point that needs to be solved. Gamma rays have strong penetrability, and the energy level of the annihilation of positive and anti-matter rays is very high. If you don't take good protection, the biological body will be affected by its own antimatter. Advance to kill."

　　The collectors echoed Min’s proposal, and everyone continued to carry out the anti-radiation design in full swing.

　　 To put it simply, it is adding heavy nuclear materials such as lead and bismuth, followed by thickening and continuous stacking-this is the only way to prevent insignificant radiation, at least for now.

　　 "In this case, it should be almost the same."

Collectors observe the antimatter advancement of this semi-finished product. They continue to modify the original basis. The front end of the antimatter container is continuously connected to the antimatter container, forming an antimatter container column, and the antimatter at the end is exhausted. At this time, the adjacent antimatter containers connected to it will communicate with each other, and the antimatter will continue to flow from the connected channel to the tail and join the annihilation reaction of positive and negative matter.

And surrounding the antimatter container column lying horizontally is a layer of gamma-ray protection layer constructed of heavy nuclear matter, so that when accelerating, it can resist the annihilation of the lower positive and negative matter and release high-level gamma-ray radiation. .

　　The built-in neural network cell bodies have their lifespan shortened by Hogu, which increases the rate of cell division and simplifies the genes of these cells to avoid gene damage to the greatest extent.

　　 It’s just that this is not the end. Gamma rays are only one aspect, and there is another aspect that needs to be resolved.

　　 "In this case, the problem of radiation penetration is solved, and the problem of heat dissipation needs to be solved."

Although gamma rays can be blocked by the protective layer of heavy nuclear matter, this also means that the energy is trapped in the protective layer, so cooling is needed to take away the trapped heat in the protective layer, otherwise the antimatter will be activated. For too long, the entire propulsion part will be melted into a mass of high-temperature plasma by the accumulated high temperature.

In order to solve this problem, solid helium is also needed. It is not difficult to manufacture solid helium. It is possible to compress helium into solid helium by using strong water pressure. The temperature of solid helium is minus 272.2 degrees Celsius, which is quite close to absolute. Subzero degrees Celsius.

The low temperature of solid helium cannot be supported by any cells, so it is necessary to design a special temperature barrier and then design a channel. When the antimatter propulsion starts, the channel together with the solid helium will be opened, and the low temperature helium will be released gradually and slowly , The heat accumulated in the gamma ray protection layer will be brought to the low-temperature helium due to the flow of body fluids, and then be cooled down. After the cooling is completed, it will be introduced into the gamma ray protection layer again.

　　 After this whole cycle, the so-called cooling process is completed.

　　 Antimatter advancement can also announce the completion of the design. Later, it is only through finished product experiments to verify that the antimatter advancement designed by Huogu is not ideal, and whether there are any factors that have not been considered.

　　 "Will, do you need to make samples now?"

　　 Collectors are excited to ask Hogu's opinion~lightnovelpub.net~ They are already eager to try.

　　 Antimatter is something that collectors have a certain degree of understanding before mass-produced. This is all thanks to the science fiction novels of the Serines, and collectors have this kind of cognition.

　　 But it is precisely these science fiction novels that make collectors subconsciously and subjectively think that ‘antimatter’ belongs to science fiction, and in reality it is only to the extent that they think about it.

　　 But now, they have been created, not only are they being created, but they are still undergoing preliminary applications. This sense of accomplishment is unparalleled.

Try to imagine, take the curvature engine as an example. You rely on the knowledge in reality, according to your own understanding and ideas of knowledge, from the theoretical basis to the material application, starting from the parts and components to build the curvature engine step by step. .

When the finished product appears in front of you, you will suddenly realize how exaggerated you have done. The things in your fantasy are dragged into reality by you, your life, your future, and your civilization. All will change as a result.

　　 just rely on your own hands!

　　 Hogu could feel the excitement of the collectors, but it still rejected the suggestions of the collectors.

　　 "No, let's apply the other antimatter to the design first, and then make the samples together, don't worry."

　　 [What's next? 】

　　 "Weapon upgrade."

　　How the Zerg is made