Military Technology

v2 Chapter 1544: High-profile transportation

  Shanghai, at the gate of the suburban core science and technology park, gathered a lot of people, a lot of people watching the excitement, and a lot of factory employees, but more of them were reporters who were set up on various machines and armed with guns and guns.

   嘭嘭嘭!

   With a few muffled sounds, bunches of daytime fireworks were released. It showed a guided off-road vehicle driving out, and then it was highlighted by everyone's attention. A Delong front semi-trailer flatbed driving out, and on the body is a white container. Saying that it is a container is actually different from a container, because this container is more exquisite, more like the kind of thermostatic cargo box used by the aerospace sector to transport rockets. Sure enough, there is an entire air conditioning thermostat system behind the rear to maintain the temperature inside the box. The humidity is constant.

   In addition, under the cargo box, there is a black buffer device 20 cm behind. This device isolates the cargo box from the flatbed truck, which can absorb the vibration caused by the vehicle transportation to a great extent.

   These very simple color textures are printed on the carriage, and the most interesting is the LOGO of the core technology in the upper right corner.

   This is the first new 5-nanometer EUV lithography machine developed by Core Technology. Today this lithography machine will depart from here and be shipped to the capital of Shu.

   After learning the news, many media were waiting at the door early in the morning in order to be able to take pictures of the lithography machine's departure. And many media are also preparing to follow up and report the whole process, so as to report the situation of the lithography machine on the road in real time.

   Click, click...

   When this car drove out, it caused a commotion among these media reporters. Or start the introduction to the camera, or pick up the camera and press the shutter like a lifeless one, to take as many photos as possible.

   Behind this lithography machine transport vehicle, there were two other semi-trailer tractor transport vehicles, but these two vehicles were all containers, and I didn’t know what was transported on them.

   The final finishing touch was a tourist bus. Inside the tourist bus were a group of young people wearing gray t-shirts. It seemed that they should be the accompanying technical support personnel of Xin Technology who followed to the capital of Shu.

  Such a complete set-up is also enough to show the importance of core technology, including Wu Hao, to the first new 5-nanometer EUV lithography machine for transportation to the capital city.

   Of course, this is Wu Hao's own arrangement. In fact, for the transportation of this new 5nm EUV lithography machine, Shanghai and Shudu have jointly made very careful arrangements along the way to ensure that the fleet of lithography equipment can reach Shudu smoothly.

   Sure enough, the convoy drove to the factory area, and saw a police car parked next to it sounding its lights and sirens, and then drove to the front of the convoy to clear the way.

   A police car with flashing lights followed behind the convoy, isolating the distance between social vehicles and the convoy.

   Temporary traffic control has been carried out at the intersection where the vehicle is driving to ensure that the fleet can proceed smoothly. And all of this was demonstrated by the media’s live footage.

  Wu Hao in the office is watching the live broadcast with Zhang Jun and others. After Zhang Jun answered a call, he immediately said to Wu Hao: "Sin Technology reported that the convoy had set off smoothly and is now being escorted by the Shanghai traffic police on the highway. As long as the highway is on, there is no big problem."

In response to this, Zou Xiaodong shook his head and said, “It’s too early to say this. The sea of ​​commerce is 2,000 kilometers away from Shu, and it will take 25 hours to travel at a speed of 80 kilometers in the form of a truck. In other words, it needs to be one day and one night. Even if there is a police car clearing the highway and the speed is increased to 100 kilometers, it will take twenty hours.

   Such a long time, it is difficult to guarantee that there will be no accidents on the way. "

   Speaking of this, Zou Xiaodong showed a puzzled look at Wu Hao: "I don't understand, why not use air transportation. It's not much more expensive than land transportation, and it's convenient, safe and fast."

Hearing Zou Xiaodong’s complaint, Wu Hao explained with a smile: “So, you are not suitable for marketing. Of course, we know that airplanes save trouble, and in terms of safety factor and time, airplanes surpass land transportation. But in the end why I chose land transportation, which is time-consuming, laborious and powerful, which is actually a marketing and publicity method.

   To put it plainly, people have waited too long for this lithography machine to be born. We need such a way to tell everyone that our domestic lithography machine has finally come out. The significance and value represented by this have actually exceeded the value of this new 5nm EUV lithography machine itself. Do you understand what I mean? "

   Looking at Zou Xiaodong’s seemingly understanding, Zhang Jun continued: “Even if this factor is not considered, from a commercial point of view, this transportation is a very good way of marketing.

We need this kind of fanfare transportation method to increase the confidence of the public and investors in our lithography machines, lithography machines and chip projects, so as to attract more attention and investment, which is also to advance the possible future listing. prepare. "

   Looking at the sudden expression on Zou Xiaodong's face, Wu Hao smiled, and then continued to look at the big screen.

   I switched to the aerial image on the big screen. I saw the fleet driving on a road with no vehicles on one side. Traffic control was carried out at every intersection where the vehicles reached to ensure that vehicles could pass smoothly and quickly.

  After going through multiple intersections~lightnovelpub.net~ the team finally got on the viaduct expressway. From here, they will directly enter the expressway, and then leave the business sea to the capital of Shu.

   The clearing police cars drove to the intersection of the high-speed toll station and stopped, and their mission was over. After the convoy passes the toll gate, high-speed traffic police vehicles will take over to clear the way and **** them out of the commercial sea.

   At the junction of the jurisdiction, there will be traffic police vehicles from the area along the way to ensure the smooth progress of the convoy.

   In the live broadcast, the experts also began to interpret it. Experts began to introduce the lithography machine and related issues in the transportation process from various angles.

   These questions and answers are actually repetitions of commonplace talk, so after listening to them for a while, everyone is not interested.

   In response, Wu Hao pressed his hand slightly, and the TV sound was then muted. Zhang Jun said to Wu Hao: "The twenty-odd hours format is also a very huge test for the driver."

"The fleet will rest five times at the service stations along the way, once every four hours, and each car will be equipped with dual drivers who will take turns to ensure driving safety during the entire process. These drivers have more than 20 years of experience. Old drivers above driving experience have very good driving skills and have special equipment transportation qualifications at the same time. There will be no problem." Wu Hao explained with a smile.

  

  Https://

  Genius remembers this site address in one second:  Mobile version reading URL: