(I am not a man. Yesterday I said that I did not do it. I am guilty. I must make it up as soon as possible. Every early month, I will be busy. I am very busy flying these days. But this is not a reason.)

..............................

Two kilometers ~

Ye Qing’s first thought was not how efficient this thing was, and the radiation was two kilometers. Purify one sewage and clean another.

But this guy has to consume a lot of electricity...

When the 110 kV grid was replaced, the eyebrows that the power company had already laughed were not eyebrows. Since the metal melting center was built, this guy has consumed two million yuan a month. The power company hated to pull a high-voltage line and let Ye Qing open it.

Strong ionization power is greater than metal melting centers.

Energy is conserved and can affect the harmful substances in the water within two kilometers, which inevitably requires enough energy.

The bay of Longxitan has more than ten square kilometers. The seawater is fluid, and the sewage will follow the flow. It is definitely not possible according to the square. It must be cleaned several times.

Just rushing this guy's power, Ye Qing estimated that the entire bay was purified, and the electricity bill was enough to buy a Lagonda.

"The cost of tens of millions has been smashed in, and the scorpion is more than awkward~" Ye Qing comforted himself.

While the monsters were burying their heads one by one, Ye Qing drove to the Red Star Shipyard.

When the strong ionized sewage treatment equipment goes into the sea and goes further and further, it is sure to get a ship to follow and collect the harmful substances that have been drawn.

With a metal boat, Ye Qing is worried that the ship will be sucked in, so come here to buy a FRP ship.

Hongxing Shipyard is the largest private shipyard in Zhongyun.

Ye Qing follows the Huanhai Avenue and wanders around the northeast of Zhongyun City. From the far side, he can see the two sides of the beach, erected two 800-ton-class, blue-painted gantry cranes like the Arc de Triomphe.

These big guys are produced by Zhenhua Heavy Industry, one of which is under the gantry cranes of the sea, and a 70,000-ton oil transport ship is carrying out the lifting of the bridge.

When Ye Qing drove to the Red Star Shipyard, the guards asked them to let go without asking.

Ye Qing stopped the car and walked directly into the customer reception room. A young girl who was working at the desk quickly got up and greeted Ye Qing.

For customers to sell, the eyes are all equipped with a sweeping function. The value of the customer’s dress is worth a sweep.

Then she classified Ye Qing into the top customer and thought that the young handsome guy was coming to order the yacht.

The hot tea is soaked, and Ye Qing’s words make her heart completely cold.

"Girl, you can do a FRP boat here for a few days. The size is the ten-meter-long and three-wide, without the hull of the motor and the ceiling." Ye Qing holds the teacup and looks around: "I have drawings here." The bow section should be slightly modified."

"Mr. Do you not consider adding a ship, radio, and cockpit?" The sales girl looked at Ye Qing with a pitiful look: "We have five yacht models to choose from, all of which are made of FRP and resin coated."

"I only need a hull, you can do it in the shortest possible days."

“It can be made in two days. We have FRP weaving equipment imported from Germany. We guarantee the density of the hull fiber produced by the manufacturer is 30% higher than the ordinary product.”

Disappointment is disappointing, and the list has to continue.

When the card was paid, the girl, who was similar to Ye Qing’s age, almost fell into Ye Qing’s credit card.

"First... sir, you can leave an address. When the hull is built, our workers will deliver it to the door."

There is also a home delivery service service?

Ye Qingxin is in the dark, and writes the address and contact number with a brush.

After buying the hull, Ye Qing returned to Longxitan and continued to manufacture strong ionized industrial sewage treatment equipment.

The result was at half past five, and Ye Qing’s phone rang.

A strange number, but the sound is no stranger, that is the female salesman at the Red Star Shipyard.

On the phone, her voice was very gentle. Did Ye Qing have time tonight?

She said that she wanted to go to the bar for a drink, but there were no friends around me. I just met Ye Qing in the afternoon and felt very good.

"I'm sorry, you are not the type I like." At this time, metal experts, in the powder metallurgy, the most important step of the embryo casting, Ye Qing who would like to date a girl who does not meet his eyes?

This refusal was direct enough and it hurts enough. The girl was stunned for seven or eight seconds.

"You...you...the hull is not sent, you can find the car and drag it."

"Whatever." Ye Qingxiao smiled and hung up.

Powder metallurgy, this is the metallurgical technology that the door sounds very tall.

Many people are unfamiliar with this technology. Isn't metal smelted like molten iron?

How to smelt with powder?

Like ceramics, metal alloy powder is used to die-cast into a finished embryo, which is then sent to a high-temperature furnace and fired like a ceramic.

The earliest technology was used to make metals that were difficult to melt, such as tungsten in bulbs.

Among various metals, tungsten is the most difficult to melt and volatilize. Its melting point is as high as 3,380 degrees, so people have a whimsy, grinding tungsten into powder, and into the catalyst, aluminum silicon and yttrium oxide.

This does not need to reach 3380 degrees, only 1500 degrees can be used to burn qualified tungsten wire.

And powder metallurgy has the advantage - one-piece molding.

Often the processing of those hard alloys can make it hard for engineers to work hard.

The high-hard alloy is also an excellent material for the manufacture of gears. It has good wear resistance and resistance to damage.

By milling, the uniformly mixed alloy powder is forged into a qualified embryo and then sent to a firing machine to obtain a gear that is not processed by any lathe.

Of course, the principle of powder-powder alloy is simple, but in the actual forging process, the requirements for industrial technology are very high, especially for high-precision molds for forging embryos.

The mold design is unreasonable. The embryos that are forged by the press will have uneven internal structures and will only be burnt out of the products.

Similarly, powder metallurgy can be used to fire metals or to fire non-metals.

Metal experts are now playing with non-metal firing, using graphite and ceramic powder as the main material, using diamond powder as the binder, mixing a certain proportion of solvent oil and alcohol, and mixing the irregular rotation with the newly built mixer. Milling, and finally through the metal melting center, forging into the shell embryo of the magnetic generator.

The greater the pressure of forging, the stronger the material will be.

The forging pressure of the metal melting center is 10,000 tons, and this data has exceeded the powder metallurgy enterprise playing a large ticket. But metal experts disdain to say that 100,000 tons of forging pressure can be considered the last "good!"