Monster Factory

v1 Chapter 86: Applause in the operating room (recomm

Shi Yuqing returned to the operating room and asked Shi’s doctor to wait another 20 minutes.

"It’s really noisy. You said it yourself. The cutting machine has to work for at least five or six hours to cut.” Another doctor screamed: "The time is wrong. If a medical accident occurs, who is responsible?"

"I believe him, he is a good-hearted person." Shi Yuqing directly ignored the anger of this doctor.

The stone doctor of the main knives observed it again with an endoscope. The situation of the palm of the mind: "The little girl's palm is all blue, I can only give half an hour."

"The squadron commander, how many times have they been broken and cut? Can we cut it, don't we understand?" The other two firefighters were hesitant. They were not afraid of taking responsibility, just watching the little girl lying in the operation. On the stage, it is too sinful, and the longer the time drags, the more likely it is to be an accident.

"He said that for twenty minutes, we waited for twenty minutes, and we should give hope to the little girl." Shi Yuqing believed Ye Qing, because his car was full of advertisements for cutting machine tools, and it was definitely better than them in the field of cutting. Members must be more professional.

When the electronic clock on the wall had just passed for 17 minutes, the door knocked on the door outside the operating room.

The little nurse pushed the door and saw that the young man had gone and returned. He also pushed a device that looked very advanced, some like an anesthesia machine commonly used in the operating room.

The little nurse can no longer understand the machine and can recognize the machine. It is not a so-called cutting machine.

It was too late to engage in strict disinfection. The little nurse directly gave Ye Qing a surgical gown and a mask.

Squadron commander Shi Yuqing and two firefighters, the expression of joy suddenly was shocked and fixed, they quickly wiped their eyes, very ignorantly looked at the machine.

This is a small, but highly complex machine. The square has a cymbal underneath, with eight hydraulic columns on top, and a working platform on the top that connects a lot of black pipes that look strong.

"You are not saying to cut with a cutting machine?" Even Shi Yuqing, who knows a lot of cutting methods, also has a big chin and looks at Ye Qing very ignorantly.

“Who said that I want to use a cutting machine?” Ye Qing quickly pushed the machine to the operating table and let the little nurse hurry to play two buckets of water.

"You, you, you don't need a cutting machine, how do you cut it?" The other doctor's nose was stunned: "What are you, how do you still have two buckets of water?"

Ye Qing ignored him and took a look at Ann.

At this point, An Si Nian has closed his eyes and his expression is painful. Time has passed so long, she has no strength to open her eyes.

The little nurse was too busy to go to the water, and Ye Qing took care of the mechanical wires.

"I will give you a science, this mechanical equipment, called CNC ultra-high pressure water cutting machine." Ye Qing plugged in the power supply and activated the control panel: "See the multi-stage hydraulic column below, it can pressurize the water to 380 MPa, shot through the nozzle above the workbench, the water flow rate is three times that of the pistol bullet."

“The cutting machine can generate huge heat even if it can cut stainless steel quickly. The cooling of the water spray can only lower the surface temperature. It takes a while to stop for a while, which is a waste of time.”

“The high-pressure water cutting machine can be completely heated without heating.”

High pressure water cutting machine...

Everyone was completely dumbfounded. When several firefighters were engaged in factory fire protection training, they also saw a high-pressure water cutting machine in Huaxing Heavy Industry. But the kind of equipment that can cut hard metal looks very clumsy and very expensive.

What about this one?

It's small enough to be moved by one person, and it's okay to put it in the back seat of the car.

However, the ultra-high pressure water cutting machine, the flow of water, will definitely wear the stainless steel cylinder...

What is the result of a stream of water that can be shot through even stainless steel?

The nurse quickly hit two buckets of water. Ye Qing could not explain their doubts. After measuring the thickness of the stainless steel cylinder with the vernier jam, quickly set the data on the control panel.

Yes!

If it is a traditional ultra-high CNC water pressure cutting machine, it is almost impossible to make the stainless steel cut only to leave a shallow layer without hurting the inside.

But Ye Qing, this small CNC water cutting machine is different. This is the rare quality processing props sold in the props mall of the monster factory.

It automatically adjusts the working pressure based on the depth of the cut from the sensor. Just like the engraving machine, cut the desired thickness without any difference.

The height of the operating table can be adjusted. Ye Qing allows the nurse to adjust to the same height as the water cutting machine table, and then use the surgical cloth to isolate the work table to prevent the water from splashing onto the body.

Adjust the parameters, Ye Qing gently put the left hand of An Si, with a stainless steel cylinder on the workbench.

A slight rotation of the motor, two fixed plates on both sides of the table, firmly hold the stainless steel cylinder.

As Ye Qing presses the switch on the control panel, the ultra-high pressure water jet nozzle on the three-axis table moves slowly to the end of the center line of the stainless steel cylinder.

Without any test knives, along with the multi-stage hydraulic column under the workbench, a little bit of movement, the nozzle of the workbench slammed, and ejected a very fine water jet that surpassed the power of human imagination.

Firefighters are wide-eyed, and in the face of this high-tech, they have completely lost their voice.

Doctors and nurses are also completely stupid. Even if they do surgery for three more years, they can't imagine that industrial high-tech processing tools can be used to save people on the operating table.

Huge noise, so that a few small nurses can not help but cover their ears.

The scenes in front of them made them unforgettable for life, and even the high-hardness stainless steel that firefighters did not dare to try, even under the shooting of this high-speed water jet, became harder than butter.

The water jet travels through a precise straight line, and the fine water droplets splash, leaving a deep cut groove.

The firefighters all mentioned the eyes of the blind, the eyes staring at the ultra-high pressure water, and kept praying, the water should never shoot through the entire stainless steel wall.

Ye Qing is not worried, because this rare quality water cutting machine can automatically adjust the working pressure according to the cutting depth from the sensor.

Suspicion of its ability is tantamount to doubting the strength of the monster factory.

It seems that there is no flow of water in the past. In fact, in the work, the pressure range has not been known how many times it has been adjusted by the NC program.

Three minutes later, the first knife was completely taken by the CNC water-cutting machine. Several firefighters bravely walked forward, and carefully observed the cutting depth with big eyes and small eyes.

Oh...

The air is blown three times, and under the straight cut dent, there is only one layer of thick stainless steel wall, which is connected with the two sides. This thickness, estimated to be a force-changing person, directly torn open.

There is a very impressive performance in the armed police and special police units, called the hand-washing basin.

The thickness of the stainless steel washbasin is much thicker than this.

Ye Qing adjusts the machine and prepares to cut the second knife.

This time, there is no need for Ye Qing to make a sound. Everyone has retreated to the side, and with a look of admiration and admiration, he looks at Ye Qing one by one.

Several little nurses are fascinated by the fact that they feel that this young and multi-golden man has a compelling appeal when he is working.

A violent "嗡~嗡~" waterjet cutting sound broke their reverie.

Three minutes later, the second cutting dent was cut out. After Ye Qing pushed the water cutting machine, the firefighters who had already eagerly tried to rush.

The two pliers were clamped to the stainless steel cylinder, and they didn't feel much hard. The stainless steel cylinder was pulled away with a slamming sound.

Perhaps the huge sense of oppression suddenly disappeared, and the left-handed man who was full of blue and purple was still unconsciously moving.

There was a wound in her palm, and it was estimated that the wound was not deep, and bleeding had stopped at this time.

The back of the hand and the fingers are all bruised, and the layman knows that it is not serious.

Taking off the winch pressed on her hand, Shi doctor carefully pinched her palm and finger bones, full of surprises: "Great, the bones are not broken. Immediately take a CT scan to see if there is any crack ""

"啪啪啪~" A little nurse slaps in excitement and looks at Ye Qing like a hero.

Under the joy of "啪啪啪~啪啪啪~", the rest of the doctors and firefighters were stunned with excitement, and they rushed to admire the eyes.

"I apologize for my stupidity." The old man was worried about making a medical accident, and the doctor who affected his future came forward. He was ashamed: "Today, you gave me a good lesson, what is technology!"

"I have to apologize." A firefighter stepped forward: "I used to say that you are stupid X and pushed the game to come in."

"I have been convinced, and the five bodies of the service have been thrown into the ground. I never knew that the original cutting operation could be advanced."