Xueba's Black Technology System Text Volume 646 Who will install this system for you? The expert in Lu Zhoukou naturally refers to Xiao Ai.

In the evening, the warehouse where the equipment was stored, a flat agv logistics vehicle followed the foot of the landing boat into the gate, and strolled a few times on the flat ground full of equipment. Looking at it in the warehouse, Lu Zhou was preparing to ask it to dry up, and the phone in his pocket would shake.

[What about my machine? So big one, just here. 】

"Say", the agv logistics car turned a circle on the open space, which is the size of the device.

Looking at the message on the screen, even though Lu Zhou felt that his face was still thick, he was a little embarrassed, scratching his cheek and saying.

"Oh, there is another one that has been borrowed."

The agv logistics car that was coming and going was suddenly stopped.

After a long time, a few characters floated on the screen of the phone.

[qaq]

Ignoring this pitiful expression, Lu Zhou coughed and said: "It’s useless to have pity, there’s only one left, just let me go... or I will give you some more money, you can buy another one. station."

Xiao Ai: [The same method is difficult to buy qaq]

Lu Zhou: "..."

If you think about it, if you kill it on the same tree, those who do intelligence work are too stupid.

But one is one.

A machine tool can be replaced by a launch site, and the rest of the machine should be enough. At most, it only takes more time.

After a pause, Lu Zhou chose to open the subject and said.

"Xiao Ai, are you buying this batch of equipment without a system?"

Xiao Ai: [Why should I install the system? Isn't this kind of thing used alone? 0.0]

Lu Zhou: "..."

Although I always feel that this sentence is a slot, but for a time he can not think of where to start spitting better.

However, if you think about it carefully, Xiaoai will say that it makes sense. After all, things that are so rough with industrial robots can come out with a Transformer. With more professional industrial machine tools, I don’t think there is much problem.

Of course, although I believe in the ability of Xiao Ai, but out of concern, Lu Zhou asked the sentence just in case.

"You don't mess with the machine like this?"

Xiao Ai: [No, I will use it carefully. 】

Lu Zhou: "Then please, you are familiar with it as soon as possible..."

Xiao Ai: [Hmm, master, give me peace of mind! 】

......

The next day, the truck of the Science and Technology Bureau opened to the Institute of Advanced Studies.

A group of people came to the warehouse again, ready to load the machine.

From the main entrance, he did not look at Yang Zhongquan standing next to him. Lu Zhou said directly to Director Li.

"I have found a personal control system for the CNC system."

As soon as I heard this, the stunned Li’s cigarette on his finger almost did not fall on the ground.

However, it was too late for him to ask, and Yang Zhongquan, next to him, laughed. "Oh? Who are you looking for?"

Lu Zhou slammed his face back and forth: "State secrets."

Estimated that Lu Zhou was copied from a cottage system, Yang Zhongquan did not suffocate with him, the cloud was light and smoked, and he glanced at the machine tool with his eyes open.

"Through you don't believe in evil, you can't do it yourself."

Lu Zhou: "How do you say it?"

When the index finger hits the ash, Yang Zhongquan does not lift the eyelids. He said casually: "I am not embarrassed, just take a s-type test piece and come out." The type test piece is proposed by several experts of AVIC and the Academy of Engineering. The machine tool testing standard was first published in the form of patents. Later, because it can play a special role in detecting five-axis linkage CNC machine tools, it has been promoted in major manufacturing plants and machine tool factories across the country.

At the same time, this s-type test piece is by far the only iso test standard for high-end machine tools developed by China. Prior to this, the ISO standard was completely controlled by countries such as the US, Germany, France and Japan.

It can be said that this s-type test piece is one of the pride of the domestic machine tool industry.

As the academician of the Academy of Engineering and the chief engineer of the sinking machine, when he formulated the testing standard for this type of test piece, Yang Zhongquan naturally participated. It is no exaggeration to say that with his many years of experience, an s-type test piece is played out, and the whole set of machine tools can't work. He knows when he reaches out and touches it.

Lu Zhou: "...?" type test piece is awkward?

Fortunately, although he did not understand, Xiaoai next to it is understandable.

After walking to the control terminal for a while, Lu Zhou pretended to touch it twice, then pressed the start button.

I saw that with the press of the button, the machine that was in the warehouse suddenly felt like a beast ready to go. It is only that the tool connected to the spindle rotates at a high speed, and the solid cubic blank fixed on the table is like a collapsed snow peak, peeling off a large amount of metal debris.

Looking at this scene, Yang Zhongquan's eyebrows frowned, and his turbid eyes picked up slightly.

The speed of this tool has been measured at least tens of thousands...

A little bit wrong.

The advantages of high-speed cutting are obvious. The high-speed cutting of the chips reduces the cutting force and thermal stress deformation of the workpiece, improves the rigidity difference and the possibility of cutting the thin-walled parts, and the finished parts have a high degree of finish.

However, while there are advantages, the weakness is also fatal, and high-speed cutting may cause the broken knife, the melting and burning of the parts.

Normally, this high-speed cutting needs to be matched with the corresponding feed rate to keep both within a certain range, so that the machining accuracy and finish as well as the tool life are optimized.

Whether a CNC system is excellent is reflected in this detail.

If a poor quality machine tool breaks a tool when machining a part, it is not necessarily because of the quality of the tool or the bearing itself. At least half of the possibilities are on the CNC system.

Of course, there is no broken knife that can maintain such a high speed. For Yang Zhongquan, it can only be regarded as reluctant to enter his eyes.

There is nothing worth boasting about this basic operation. Many machine tools with imported ceramic bearings and Nissan systems can do it, not to mention the latest five-axis linkage machine from Siemens.

This system can be unreliable, the key is whether you can make things.

If you can't do it, or make it a defective product, you are a tool that goes to heaven and is no good.

Thinking of this, Yang Zhongquan’s brows re-stretched and restored the previous look.

Standing next to the control terminal, Lu Zhou, who was not very familiar with this thing, simply took out the mobile phone and continued to brush up the paper that was not finished last night, and turned a deaf ear to the things in the warehouse. About ten minutes later, the high-speed rotating tool stopped, and a piece of metal that was twisted into an s-type lay on the workbench.

The faces of several engineers standing around showed a surprised expression.

Is it finished?

So fast?

Seeing that the machine tool had no movement, Lu Zhou stuffed the phone back into his pocket and looked at Yang Zhongquan, laughing and laughing.

"It seems that the processing is finished."

"You don't have to remind me."

Yang Zhongquan responded with a cold voice and frowned and walked toward the machine.

Standing next to the machine, I saw that the wrinkles on the forehead of the old man became deeper and deeper.

Then, standing on the side of the boat, he saw that he stretched his index finger and gently touched the s-type test piece, and his face suddenly changed.

Warm!

Looking at the change of his expression, Lu Zhou did not quite understand what he was thinking, just smiled and teased: "Is it hot? Do not blow first."

There was no half-drinking thoughts about his ridicule. Yang Zhongquan quickly turned the s-type test piece over his face, tilting his thumb full of the old man, and slid up the curved surface on the inside.

However, just like this, the expression on the whole face has changed.

The hand holding the s-type test piece shook slightly, and Yang Zhongquan said with a trembling voice, intermittently.

"This system... Who installed it for you?"

Genius website address:. m.